Bottom Brackets

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The ITA for SRAM DUB Road comes in two bearing options. The first option is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second option is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: Italian BB - Opening diameter: Threaded - Shell width: 70mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet - Spacer tube

The new SRAM DUB bottom bracket series has a simple job—connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we’ve engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride. - One oversized spindle to work across every bottom bracket standard. - Significantly lighter than PFGXP system - Easier installation by allowing you to press the bearing cups into the frame - Easy installation - Two fully sealed cartridge bearings - ISO 4210 compliant. See Declaration of Conformity for details. - BB-frame interface PressFit (MTB: 89/92mm) - Crank-BB interface DUB - Bearing type Standard - Spindle diameter DUB - Cup material Steel

The new SRAM DUB bottom bracket series has a simple job: connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we've engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride. - One oversized spindle to work across every bottom bracket standard. - Greater bearing durability - Easy installation - PressFit cups for lighter weight

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

Downhillers and freeriders need tough gear that can handle the abuse of big air and huge drops. TruVativ's Giga Pipe Team DH Bottom Bracket uses four sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.

The new SRAM DUB bottom bracket series has a simple job: connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we've engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride. - One oversized spindle to work across every bottom bracket standard. - Significantly lighter than PFGXP system - Easier installation by allowing you to press the bearing cups into the frame

The new SRAM DUB bottom bracket series has a simple job—connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we’ve engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride. - One oversized spindle to work across every bottom bracket standard. - Significantly lighter than PFGXP system - Easier installation by allowing you to press the bearing cups into the frame - Easy installation - Two fully sealed cartridge bearings - ISO 4210 compliant. See Declaration of Conformity for details. - BB-frame interface PressFit (Road: 86.5mm) - Crank-BB interface DUB - Bearing type Standard - Spindle diameter DUB - Cup material Steel

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Designed for use with SRAM Wide Cranksets - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

Genuine replacement parts Revive your ride with a fresh set of bearings for your BB90/95 equipped carbon bike. Proprietary replacement bottom bracket for the Trek family of bikes. - Only compatible with 24mm cranks - Not compatible with BB30 cranks

Designed to be used with X-Type or EXI cranksets. Manufactured from high strength aluminum & featuring custom retainer bearings. Features • BB Cups are forged & CNC machined from 6066 aluminum. • Tapering wall construction to minimize weight. • Custom 6805 16 ball retainer bearing • Bearings feature our custom triple wiper seal to better retain grease & keep contaminants out. • Bearings are factory filled with Phil Wood waterproof grease — tested & proven to extend bearing life.

• CNC machined in Barnoldswick, England • Custom stainless steel bearings by INA of Switzerland are double sealed with a non contact free running Labyrinth seal with aluminum center tube • Compatible with Shimano Mountain Hollowtech II and Race Face X-Type

The Revolver bottom bracket features two sealed bearings and 6061 Alloy CNC machined cone spacers with weight-saving tear-drop slots. - Precision sealed bearings - Swaged waist tube spacer for 73mm BB shells - Spindle size: 19mm or 22mm - Shell Size: Mid - Tube Spacer: Swaged waist with 5mm spacer - Spacers: 2.5mm alloy (x4) - Weight: 4.0-ounce

Compared to the power transfer of the conventional square taper spindle, the 8-splined OCTALINK interface that connects the bottom bracket and crankset increases the strength and rigidity for the entire assembly.

Genuine replacement parts Revive your ride with a fresh set of bearings for your BB90/95 equipped carbon bike. Proprietary replacement bottom bracket for the Trek family of bikes. - Only compatible with 24mm cranks - Not compatible with BB30 cranks

Campagnolo ProTech bottom brackets feature a patented external sealing ring design that protects a strong, resilient fiberglass-charged polyamide central tube from the harmful ingress of water, mud and grit. - Designed specifically for gravel riding and racing to protect against water, mud & grit

The EVO386 standard is designed for oversized spindles. CeramicSpeed's kit for Shimano allows you to install Shimano or FSA cranks with 24mm spindles. The cups come with CeramicSpeed Bearings installed. Both CeramicSpeed Standard and Coated Bearings are available. Both utilize super smooth CeramicSpeed Balls and hardened-steel races. The latter has an additional metallic coating on the races to further smooth and harden the steel, further increasing life and lowering drag. The design of overlapping cups extending through the shell for EVO386 reduce the likelihood of creaking and increase the reliability of the system. The CeramicSpeed Standard Bearings feature an average drag reduction of 75% compared to stock bottom brackets. That translates into frictional drag of 0.3-0.4 watts per set, which is the result of great design, hardened-steel races, and ceramic balls that are 100% smoother and 15% harder than the ceramic competition. The CeramicSpeed Coated Bearings are a step up as they reduce drag by 50% compared to our Standard Bearings and an improvement in bearing life by 60%. All Round Grease comes standard in the bearings, but can be replaced for lower drag TT and Track Grease or higher durability LongLife Grease, which adds a bit of drag but stays in the bearing when riding through messy conditions. In The Box: - 1 bottom bracket with bearings installed - 2 dust covers - 10ml syringe of All Round Grease - Sticker Sheet

- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Compatible with Cannondale Ai frames - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

- Left and right bottom bracket cups with standard bearings for FSA MegaExo cranks - BB-9050 is for 24mm spindle 68/73mm MTB K-Force and Team Issue cranks - BB-8681 for K-Force Light (a non-ceramic option) and SLK Light Road MegaExo cranks (BB-8681 bearing covers have been redesigned so that the spindle now rides directly on the bearing itself) - BB-7000 is for 24mm spindle 68/73mm shell MTB Gravity Lite, Moto X and Afterburner cranks - BB-7000 is for 24mm spindle 83mm shell MTB Gravity Lite cranks - BB-6200 is for 24mm spindle 68mm shell Energy, Gossamer and Omega No Bolt Design cranks - BB-6000 is for 24mm spindle 68mm shell Energy, Gossamer and Omega cranks - BB-4000 is for 19mm spindle 69mm shell Omega cranks - BB-1000 is for 19mm spindle 68/73mm MTB Gamma cranks - 1.37" x 24tpi (English threads) or M36 x 24tpi (Italian threads)

ISIS revolutionized bottom bracket spindles. Keep yours spinning smoothly with this Platinum ISIS Bottom Bracket from FSA. - Forged, hollow chromoly spindle with titanium nitride coating - Integrated, large ball bearing design - Cold-forged aluminum cups - Includes crank bolts

Striking the balance between light weight, long life and durability, TruVativ's Giga Pipe Team SL Bottom Bracket uses 3 sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.

Shimano BB-ES51 Octalink V2 Bottom Brackets - Fits Shimano Octalink V2 Spline Cranksets - Crankarm fixing bolts not included

The SRAM DUB bottom bracket series has a simple job— to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - For Super Boost+ cranks - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

The Hellbender 70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance. - 440C stainless steel bearings, dual lip seal, marine grease - Machined aluminum cups

The Hellbender70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance. - 440C stainless steel bearings, dual lip seal, marine grease - Machined aluminum cups

Race Face bottom bracket spacer kit for 124-130mm bottom brackets.

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The BB30 for SRAM DUB Road comes in two versions; one using our CeramicSpeed Standard Bearings and the other using our Coated Bearings for even longer lifetime and lower friction. Compatible with: - Frame: BB30 - Opening diameter: 42mm - Shell width: 68mm - Bottom Bracket Tool for installation: BBT-79 In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker Sheet

SRAM's GXP Team PressFit MTB Bottom Bracket Cups are the premium choice for getting the most out of every pedal stroke. They feature smooth bearings that keep drag to a minimum and seals that keep debris out. Plus, these BB cups press directly into the frame without having to be threaded in for reduced weight and enhanced durability.

A tough bottom bracket that will go as hard as you. The PowerSpline has a heat-treated chromoly 12 spline spindle to make sure it can go the distance with even the most demanding riders. SPECIFICATIONS: - BB-FRAME INTERFACE: English/BSA 68E/73mm, English/BSA 68mm, English/BSA 73mm - CHAINLINE: 46.0mm, 48.5mm, 51.0mm, n/a - SPINDLE LENGTH: 108mm Spindle, 113mm Spindle, 118mm Spindle - SUPPORT E-TYPE FD: n/a, Yes - CRANK-BB INTERFACE: Power Spline - BEARING TYPE: n/a - SPINDLE DIAMETER: n/a - CUP MATERIAL: n/a - WEIGHT (G): 363 - WEIGHT BASED ON: BSA 73mm, 113mm spindle

The PF30 standard is widely used. To make it compatible with Shimano and other 24mm diameter cranks, as well as improve the system, select this bottom bracket. The package comes with two cups and CeramicSpeed Bearings installed. The cups have extended inner sleeves and join with a center section, reducing the likelihood of creaking and increasing the reliability of the system while also eliminating spindle rub on internal cables. The cups mate with 24/22mm crank spindles. There are two bearing options. Both Standard and Coated Bearings feature super smooth CeramicSpeed Balls and hardened-steel races. The CeramicSpeed Coated Bearings have an additional feature: a 3-micron thick metallic layer over the races. This addition makes the races smoother and harder, lowering drag and increasing life. The CeramicSpeed Standard Bearings have only 0.3-0.4 watts of frictional drag per set, an average drag reduction of 75% compared to stock bottom brackets. This is the result of great design, including hardened-steel races and CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. They also last longer. The CeramicSpeed Coated Bearings last even longer and feature even lower drag. Life increases by 60% and drag drops by 50% compared to our CeramicSpeed Standard Bearings. All Round Grease is installed in the bearings. It can be replaced for lower-drag TT and Track Grease or higher-durability LongLife Grease, which adds a bit of drag but stays in the bearing when riding through messy conditions. In The Box - 1 bottom bracket with bearings installed - 2 dust covers - 10ml syringe of All Round Grease - Sticker sheet

External English (BSA) threaded bottom bracket for 73mm shells. Wheels Mfg uses only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable. Includes: (2) - Enduro Silicone dust seals (1) - 2.5mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 1.8mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 0.7mm aluminum BB cup spacers for use with 68mm wide BB shell (2) - 0.5mm crank spindle spacers (2) - 1.0mm crank spindle spacers (1) - Wave Washer Direct replacement for SRAM/Truvativ GXP bottom brackets! - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68-73mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 116g

External English (BSA) threaded bottom bracket for 73mm shells. Wheels Mfg uses only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable. Includes: (2) - Enduro Silicone dust seals (1) - 2.5mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 1.8mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 0.7mm aluminum BB cup spacers for use with 68mm wide BB shell (2) - 0.5mm crank spindle spacers (2) - 1.0mm crank spindle spacers (1) - Wave Washer Direct replacement for SRAM/Truvativ GXP bottom brackets! - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68-73mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 116g

Wheels Manufacturing's PressFit 30 Bottom Brackets are an excellent direct replacement for SRAM, FSA and other PressFit 30 BBs. They are 100% made in the USA with machined aluminum cups for superior durability and your choice of standard sealed, angular contact or ceramic bearings (this model has sealed bearings). Wheels Manufacturing also exclusively uses Enduro bearings for excellent performance and longevity. Other great features of these stellar BBs include a 12% increase in bearing strength over standard models; serviceable bearings; dual exterior silicone rings for easy installation and to eliminate creaking; double-lip bearing seals; and even the highest quality grease appropriate for bottom bracket use and also more of it for smoother running and maximum durability!

The FSA Alloy Cup JIS bottom bracket is suitable for Italian threaded interfaces. - Alloy cups - Double "snap" seals for water and dirt protection - Spindle Interface Type: Square Taper JIS

Wheels Mfg BB86/92 thread together bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm, 92mm, 89.5mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 106g

T47 threaded BB cups for running 22/24mm spindle (SRAM) cranks in T47 frames. Cups have internal bearings and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, or a titanium-compatible anti-seize compound in titanium BB shells. - Bearings: Enduro Angular Contact (non-drive-side bearing: ABEC-3) - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width: 68mm – 132mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Over Bearing Width: 91.7mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 48.5mm x 16-notch

The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 130g

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Compatible with Cannondale Ai frames - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

As The Wheel Turns This trusty 30mm workhorse of a bottom bracket is built with custom RF double row cartridge bearings for trouble-free, long haul rolling for you PF41 frame. In A Sea Of Bearings These little buggers can make a huge difference, so we've made sure our double row custom retainer bearings are super durable and up for the long run. Close Enough Won't Cut It These precision steel cup are coated for corrosion resistance, and CNC-ground surfaces of this bottom bracket provide an exact, perfectly quiet fit in your frame. Weather, Or Not All RF bottom brackets come with an inner plastic sleeve to keep the elements out and include all appropriate spacers to ensure a versatile fit.

Get more distance out of every pedal stroke with SRAM's BB30 Bottom Bracket Assembly. It features sealed bearings for a smooth pedal stroke and impressive reliability. Plus, it presses directly into your frame's BB30 bottom bracket shell for reduced weight and increased longevity.

Rock The BB Precise fit, smooth-rolling operation, long-living performance–what more can you ask for from a bottom bracket? Install a 30mm CINCH crankset friendly PF30 and get riding...and keep riding. Rolling deep The PF30 bottom bracket uses reliable 6806 retainer bearings packed with waterproof grease, along with wiper seals to keep the gunk out. Close Enough Won't Cut It We fired up the ol' CNC machine to make sure the anodized 30mm alloy cups of this bottom bracket provide an exact, perfectly quiet fit for your frame. Weather, Or Not All RF bottom brackets come with an inner plastic sleeve to keep the elements out and the appropriate spacers to ensure a perfect fit.

This FSA MegaExo bottom bracket is for use MTB MegaExo cranksets with 24mm spindles. - Sealed bearings - Die-cast then CNC machined alloy bearing cups - Composite Di2-compatible adjustable center sleeve

Shimano's Ultegra bottom bracket uses Pro Tour-proven technology for lighter weight and super smooth spinning, while still maintaining the same level of durability and stiffness. It's available in English, Italian, or Press Fit models.

Bottom brackets from FSA for non-threaded applications. - 24mm spindle compatibility - Stainless steel bearings - Spindle Interface Type: FSA MegaExo - BB Shell Width: 92mm - Bottom Bracket Shell I.D.: 41 - BB/Frame Interface: BB92

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

Running a conventional threaded bottom bracket on your BB30 or PF30 frame doesn't have to be complicated. This press-fit adapter from FSA goes in snug and opens up a lot of crankset possibilities for your BB30/PF30 frame. - Aluminum - Allows conventional threaded bottom brackets to be installed in a BB30 or PF30 frame - Install with headset press (not included) and green Loctite (included)

The game-changing DUB family goes ceramic. While DUB has been simplifying the game, eliminating compatibility frustration and confusion for years, the DUB ceramic bottom bracket gives riders an additional option for even more silky-smooth performance. This is a whole other level in bottom bracket friction reduction, thanks to its high efficiency, ceramic bearings. What's more, the DUB ceramic bottom bracket can help riders save precious rotational energy without sacrificing the kind of robust seals required for real MTB and road racing scenarios - High-efficiency ceramic bearings save riders rotational energy - Silky smooth, without sacrificing robust seals required for real-life durability MTB and racing scenarios - One oversized spindle to work across every bottom bracket standard - PressFit 30 (68-73mm) Road Wide Specifications: - Spindle Interface Type: SRAM DUB - Bottom Bracket Shell I.D.: 46 - BB Shell Width (mm): 68 - Defined Color: Black - BB/Frame Interface: PF30 - Weight: 120

Shimano BB-ES300 Octalink V2 Bottom Brackets - Fits Shimano Octalink V2 Spline Cranksets - Crankarm fixing bolts not included

The SRAM DUB bottom bracket series has a simple job— to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard - Significantly lighter than GXP system

The new SRAM DUB bottom bracket series has a simple job—connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we've engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride. Features - One oversized spindle to work across every bottom bracket standard. - Greater bearing durability - Easy installation - Threaded internal cups for an integrated look

FSA PowerPro JIS Cartridge Bottom Brackets. - Includes bolts - Spindle Interface Type: Square Taper JIS - BB Shell Width (mm): 68 - BB/Frame Interface: English

The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: Enduro Angular Contact (22/24mm SRAM non-drive-side bearing: ABEC-3) - Color: Black - Bottom Bracket/Frame Interface: Cannondale BB30A - Bottom Bracket Shell Width: 73mm - Bottom Bracket Shell I.D.: 42mm - Over Bearing Width: 91mm in 73mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16 notch

The Problem Solvers Bushnell Eccentric Bottom Bracket is the industry leading design for chain tension adjustment on tandem and dedicated single speed bikes equipped with eccentric bottom bracket shells. The classic version features full-body, aluminum construction across the shell for maximum surface area friction and additional value. The Bushnell Fat Bike Eccentric Bottom Bracket is designed for the 100mm shells in most fat bikes. - Accepts English threaded bottom bracket cups - Classic, full-body design - Diameter of part - 2.118 inches (53.78mm) - Fits BB shells from 53.8 ~ 54mm I.D. without shim - Fits BB shells up to 100mm width

Race Face bottom brackets for use with 30mm spindle cranksets in the Race Face CINCH crank family. - Compatible with standard threaded BSA shells - Standard 6806 retainer bearings - Includes inner plastic sleeve and spacer; additional BB fitments can be accommodated with CINCH spacer kits - Inner sleeve protects against water - Rubber seal located on the bearing's external side helps to reduce the risk of water penetration

T47 threaded BB cups for T47 frames and 22/24mm spindle diameter SRAM and Truvativ GXP cranks. Cups have outboard bearings and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers - 1x 24mm ID wave washer - Drive Side Bearing: Enduro ABEC-3 - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width (mm): 68mm - 100mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Crank Spindle Diameter: 22/24mm - Over Bearing Width: 91.2mm in 68mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Tool Pattern: 44mm x 16-notch - Weight: 162g

Surly OD Bottom Brackets - Compatible with 24mm spindles - Moonlander BB fits a 100mm bottom bracket shell, but exterior width conforms to BB121 standard

Run 29mm spindle SRAM DUB compatible cranks in a BSA threaded frame. Machined aluminum cups thread into a standard threaded frame and feature Enduro 6806/29 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable. Bottom Bracket Includes: - BB Cups with bearings - 2 x Silicone dust seals - 2 x 0.5mm crank spindle spacers - 2 x 1.0mm crank spindle spacers - 1 x 2.5mm crank spindle spacer - Bearings: Enduro 6806/29 ABEC-3 - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm, 73mm, 100m - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Diameter: 29mm - Tool Pattern: 48.5mm x 16-notch - Over Bearing Width: 91.5mm in a 68mm wide shell - Weight: 102g Compatible with the following Bottom Bracket Standards and SRAM DUB compatible cranks with 29mm diameter spindle: - ISO/English or BSA Threaded (1.37 in x 24 TPI) - 68mm, 73mm, and 100mm BB Shell Width (if used in a 100mm wide shell, install the cups without the center plastic center sleeve)